Doretel Communications, Inc. is your premier provider of integrated communications solutions.Call us today and request a free quote 404.755.5721
 
 
 
 
 
Tenor AX Specifications
     
 

CALL MANAGEMENT FEATURES

• Automatic call type detection: Voice/Modem/Fax
• Answer and Disconnect Supervision
• Trunk group support
• Public and private dial plan support
• User programmable dial plan support
• Forced IP routing and IP port mapping
• Pass-through support for calls to Toll-Free, local and special service numbers (i.e., emergency services, etc.)
• Automatic appending and stripping of digits to dialed numbers
• Call Detail Records
• Least cost routing with external Quintum VoIP Call Routing Server*
• Type I Caller ID Name support (Telcordia, ETSI, NTT and DTMF)

TECHNICAL SPECIFICATIONS

Telephony Specifications
• Voice algorithms: G.723.1a, G.729ab, G.711
• Auto codec negotiation
• Fax support: Industry standard T.38 and Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps
• Modem over IP
• Choice of 8, 16, or 24 FXS and/or FXO configurations or a 48 FXO only configuration
• Standard 50 pin RJ-21 Telco connectors
• Coding: A-law, μ-law
• Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G168, up to 128 msec tailsize
• Loop Start, Reverse Battery, Battery Disconnect
• Tandem/TDM switching
• Maximum Call Rate: 1,800 calls/hour

IP Network Specifications
• LAN Interface: 1 Fast Ethernet port (10/100 Base-T)
• Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T connections
• DHCP Client
• QoS Support: IP TOS, DiffServ

VoIP Network Specifications
• H.323 v.3 Gateway and Integrated Gatekeeper
• SIP User Agent
• SIP Back-to-back User Agent (B2BUA)**
• SIP RFC2833 In-band DTMF signaling
• SIP Refer Method Support
• IVR/RADIUS server support for AAA with integrated multilingual IVR
• Adaptive Voice Activity Detection (VAD) with Comfort Noise Generation (CNG)
• Adaptive Jitter Buffer
• Packet Loss Compensation
• NATAccess™
• Security: IP Filtering
• Up to 48 simultaneous VoIP calls

Configuration/Management
• Quintum Tenor Configuration Manager (GUI) for configuration of remote individual Tenors
• Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring
• SNMPv2 Agent
• Command Line Interface

GENERAL SPECIFICATIONS

Dimensions (1U High Chassis)
W 17 3/8" x H 1 3/4" x D 10 3/4"
W 44.5cm x H 4.5cm x D 27.6cm
• Maximum weight: 10 lbs. (4.55kg)
• AC Power: 100-240 Volts AC, 50/60 Hz, 60 watts
• Operating temperature: 40° - 104° F (5° - 40° C)
• Operating humidity: 20% - 80% non-condensing
• Telco: FCC Part 68, TS-016, TBR4, TS-038, CS03
• EMC: FCC Part 15 EN55022, EN55024, EN61000-2-3, EN61000-3-3, AS/NZS3260
• Safety: UL60950, EN60950, AS/NZS60950

 
     
  Back  
     
 
 
Atlanta Web Design by GoMedia Solutions.