Doretel Communications, Inc. is your premier provider of integrated communications solutions.Call us today and request a free quote 404.755.5721
 
 
 
 
 
Tenor CMS Specifications
     
 

CALL MANAGEMENT FEATURES

• Automatic call type detection: Voice/Modem/Fax
• Answer and Disconnect supervision
• Trunk group support
• Public and private dial plan support
• Automated load balancing
• Forced routing
• Pass-through support for calls to toll-free, local and special services numbers (i.e., emergency services)
• Automatic appending and stripping of digits to dialed numbers
• Call Detail Records
• Least cost routing with Quintum VoIP Call Routing Server*

TECHNICAL SPECIFICATIONS

Telephony Specifications
• Voice algorithms: G.723.1 and G.729ab, G.711
• Auto codec negotiation
• Fax support: Industry Standard T.38 and Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps
• Modem Over IP
• Coding: A-law, µ-law
• PRI Signaling Protocols: National ISDN-2, Euro ISDN NET5, Japan INS-NET1500,
KDD, 4ESS, 5ESS, DMS100
• T1 CAS (E&M, Loop Start, Feature Group-D, DTMF, MF)
• E1 CAS (R2 MF)
• DASS2
• Tandem/TDM switching
• Maximum Call Rate: 28,800 calls/hour
• SS7/C7 support using an external SS7 signaling gateway
• VoIP to circuit, and circuit to circuit(Tandem/TDM) switching

IP Network Specifications
• LAN Interface: Fast Ethernet port (10/100 Base-T)
• Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T connection
• QoS Support: IP TOS

Configuration / Management
• Network Management Server interface for network-wide administration and monitoring
• Central provisioning and management
• SNMPv2 Agent
• Alarm/Fault detection and reporting
• Command Line Interface

VoIP Network Specifications
• H.323 v.3 Gateway and Integrated Gatekeeper
• SIP User Agent (RFC3261 compliant endpoint)
• SIP Back-to-back User Agent (B2BUA)
• SIP RFC2833 In-Band DTMF Signaling
• SIP Refer Method support
• IVR/RADIUS server support for AAA with integrated multilingual IVR
• Adaptive Voice Activity Detection (VAD) with Comfort Noise Generation (CNG)
• Adaptive Jitter Buffer
• Carrier Grade Echo Cancellation: ITU Rec. G.165/G.168, up to 128 msec tailsize
• Packet Loss Compensation
• NATAccess™
• Security: IP Filtering

Card Specifications
• System Controller (CPU) with Fast Ethernet port 10/100 Base-T
• DS-1 8 Port (T1/E1/PRI) Line Interface Card with built-in CSU. Individual spans software
configurable between T1 and E1; accepts one or two plug-in DSP resource modules.
• DSP-120 DSP Resource Module supports up to 120 simultaneous VoIP calls

GENERAL SPECIFICATIONS

• Operating temperature: 40° F - 104° F (5° C - 40° C)
• Operating humidity: 20% - 80% non-condensing
• Telco: FCC Part 68, TS-016, TBR4, TS-038, CS03
• EMC: FCC Part 15 Class A, EN55022 Class A, EN55024, EN61000-2-3, EN61000-3-3
• Safety: UL60950, EN60950, AS/NZS60950

2 Slot Chassis (1U)
• Dimensions:
W 17 1/2" x H 1 3/4" x D 11 7/8"
W 44.5cm x H 4.5cm x D 30.2cm
• Maximum weight: 11.5 lbs (5.25kg)
• AC Power: 100-240 Volts AC, 50/60 Hz, 300 watts
• DC Power: -40 - -60 Volts DC, 300 watts

8 Slot Chassis (4U)
• Dimensions:
W 17" x H 7" x D 11 7/8"
W 44.5cm x H 17.8cm x D 30.2cm
• Maximum weight: 27.6 lbs (12.5 kg)
• AC Power: 100-240 Volts AC, 50/60 Hz, 600 watts
• DC Power: -40 - -60 Volts DC, 600 watts

* Quintum product purchased separately.

 
     
  Back  
     
 
 
Atlanta Web Design by GoMedia Solutions.