Doretel Communications, Inc. is your premier provider of integrated communications solutions.Call us today and request a free quote 404.755.5721
 
 
 
 
 
Tenor DX Specifications
     
 

CALL MANAGEMENT FEATURES

• Automatic call type detection: Voice/Modem/Fax
• Answer and Disconnect Supervision
• Trunk group support
• Public and private dial plan support
• User programmable dial plan support
• Forced routing
• Pass-through support for calls to Toll Free, local and special service numbers (emergency services, etc.)
• Automatic appending and stripping of digits to dialed numbers
• Call Detail Records
• Least Cost Routing with external Quintum VoIP Call Routing Server*

TECHNICAL SPECIFICATIONS

Telephony Specifications
• Voice algorithms: G.723.1 and G.729ab, G.711
• Auto codec negotiation
• Fax support: Industry standard T.38 and Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps
• Modem over IP
• Choice of 2, 4, 6, or 8 T1/E1/PRI Spans
• Standard RJ-45 Connectors
• Coding: A-law, μ-law
• Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G 168, up to 128 msec tailsize
• PRI Signaling Protocols: National ISDN-2, Euro ISDN NET5, Japan INS-NET1500, KDD, 4ESS, 5ESS, DMS100
• T1 CAS (E&M, Loop Start, Feature Group-D, DTMF, MF)
• E1 CAS (R2 MF)
• DASS2
• Tandem/TDM switching
• Maximum Call Rate: 7,200 calls/hour
• VoIP to circuit, and circuit to circuit (Tandem/TDM) switching

IP Network Specifications
• LAN Interface: Fast Ethernet port (10/100 Base-T)
• Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T connections
• QoS Support: IP TOS, DiffServ

VoIP Network Specifications
• H.323 v.3 Gateway and Integrated Gatekeeper
• SIP User Agent (RFC 3261 compliant endpoint)
• SIP Back-to-back User Agent (B2BUA)**
• SIP RFC2833 In-Band DTMF Signaling
• SIP Refer Method support
• IVR/RADIUS server support for AAA with integrated multilingual IVR
• Adaptive Voice Activity Detection (VAD) with Comfort Noise Generation (CNG)
• Adaptive Jitter Buffer
• Packet Loss Compensation
• NATAccess™
• Security: IP Filtering
• Up to 120 simultaneous VoIP calls

Configuration/Management
• Quintum Tenor Configuration Manager (GUI) for configuration of remote individual Tenors
• Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring
• SNMPv2 Agent
• Command Line Interface

GENERAL SPECIFICATIONS

Dimensions (1U High Chassis)
W 17 3/8" x H 1 3/4" x D 10 3/4"
W 44.5cm x H 4.5cm x D 27.6cm
• Maximum weight: 8.25 lbs (3.75kg)
• AC Power: 100-240 Volts AC, 50/60 Hz, 50 watts
• Operating temperature: 40° - 104° F (5° - 40° C)
• Operating humidity: 20% - 80% non-condensing
• Telco: FCC Part 68, TS-016, TBR4, TS-038, CS03
• EMC: FCC Part 15, EN55022, EN55024, EN61000-2-3, EN61000-3-3
• Safety: UL60950, EN60950, AS/NZS60950

* Quintum product purchased separately.
** Not supported in initial software release.

 
     
  Back  
     
 
 
Atlanta Web Design by GoMedia Solutions.